Monitoring Parameters That Cover Every Patient, Every Setting

The X8 measures seven parameter types as standard — all displayed simultaneously on a single screen—no secondary device needed for any patient type from neonate to adult.

ECG & Cardiac Monitoring

• 3/5-lead ECG waveform with iSEAP™ algorithm — optimised for arrhythmia detection and pacemaker identification — reduces false positive alarms in high-acuity environments

• Defibrillation and electrosurgical interference protection — the monitor remains active and readable during procedures — no signal blackout during critical interventions

• Pacemaker detection built-in — correctly interprets paced rhythms — prevents HR miscounting on pacemaker-dependent patients

•  Optional 6–12 lead ECG upgrade — extends diagnostic capability for pre-procedure cardiac screening without purchasing a separate ECG machine

SpO₂, NIBP & Respiration

•  iMAT™ SpO₂ technology — validated for motion resistance and low perfusion performance — maintains reliable readings on restless or poorly perfused patients

•  iCUFS™ NIBP algorithm — validated for cardiac patients, hypertensive patients, and neonates — one algorithm covers your full patient population without mode switching

•  Simultaneous ECG, SpO₂, NIBP, and respiration on one screen — clinicians see the full cardiorespiratory picture at a glance — no toggling between display modes during rapid assessment

Temperature & Optional EtCO₂

•  Single-channel skin temperature probe included — baseline thermal monitoring without additional purchase — kit-ready out of the box

Optional G2 sidestream CO₂ module (EtCO₂) — adds capnography to the X8 without a separate monitor — essential for procedural sedation, post-extubation monitoring, and post-op recovery.

Built for the Way Hospitals Actually Work

The X8 patient monitor is not a single-department device. A consistent form factor, a single training protocol, and a patient range from neonatal to adult mean one device covers multiple settings across your facility.

General Ward & Step-Down Units

•  Intuitive shortcut menu with single-tap parameter access — nursing staff reach the functions they need without navigating sub-menus — reduces time spent on the device and increases time at the bedside

•  Dual alarm lights visible from the corridor — colour-coded alarm indicators on both sides of the unit — staff at the nursing station and at adjacent bays receive simultaneous visual alerts

•  Pitch tone modulation — alarm tone adjusts with physiological urgency — helps staff distinguish routine alerts from critical events without looking at the screen

•  240-hour trend graph and tabular review — a full ten days of trend history accessible at the bedside — supports clinical handover, audit, and post-event review without accessing a separate system

In-Hospital Transport & Transfer Units

• Built-in carry handle — integrated into the chassis — no clip-on handle required, suitable for one-person carry during short transfers

• Rechargeable Li-ion battery (14.8 V) — continuous monitoring during transport from ward to imaging, operating theatre, or ICU — no monitoring gap during transfer

• 5.3 lb / 2.4 kg form factor — mounts on bed rail brackets or portable trolley without obstructing patient access — compatible with standard hospital bed rail attachments

• Waveform recording maintained during transport — 48-hour continuous waveform log captures the full transfer period — available for post-event clinical review

Outpatient Clinics & Procedure Rooms

• Neonatal-to-adult range on a single SKU - The X8 functions as a complete vital signs monitor for clinics that need ECG, SpO₂, NIBP, respiration, and temperature from a single compact device - eliminating the need to maintain separate spot-check monitors and continuous monitors in the same procedure room.

• Optional 6–12 lead ECG module — pre-procedure cardiac screening on the same device used for monitoring — reduces room clutter and eliminates the need for a standalone ECG machine in procedure rooms

Configurations

• X8: Standard Configuration 8-Inch Touchscreen Patient Monitor with Wi-Fi and Internal Review Memory (1 EA)

• X8-G2: Advanced Configuration 8-Inch Touchscreen Patient Monitor with Wi-Fi and Internal Edan Sidestream G2 CO2 Module (1 EA)

Wi-Fi Connectivity & EMR Integration

The X8 ships with Wi-Fi 802.11 b/g/n built in as standard. There is no Wi-Fi dongle to purchase separately, and no driver installation is required — connect to your existing hospital wireless network during initial setup.

Built-In Wi-Fi 802.11 b/g/n

• Wireless connection to central monitoring station — live vital sign streams from multiple X8 units to a single nursing station display — no bedside cabling, no port patching

• Compatible with existing hospital Wi-Fi infrastructure — standard 802.11 b/g/n protocol — your IT team configures it the same way as any other networked clinical device

• Simultaneous multi-bed monitoring from one station — Edan CMS software supports concurrent feeds from multiple monitors — one nurse can oversee multiple bays without leaving the station

EMR & HL7 Integration

• HL7 output for bi-directional HIS communication — vital sign data writes directly into the patient record — eliminates manual transcription errors during high-volume shift periods

• AES-encrypted USB data export — data exported to USB is encrypted at rest — compliant with clinical data security requirements for portable media

Note: USB data exported from the X8 is AES-encrypted. A standard computer cannot open these files without Edan CMS or CMS Lite III software. If your workflow requires offline data review, add CMS Lite III to your order — or configure your unit with the optional thermal printer for immediate bedside-printed records.

Central Monitoring Station Compatibility

• Edan CMS and CMS Lite III software — multi-bed live monitoring view from a single workstation — CMS Lite III is a cost-effective entry point for smaller facilities

• Prints directly to a networked HP printer — in addition to the optional integrated thermal printer, the X8 can route print jobs to a standard network HP printer already installed in the department

What’s in the Box & Compatible Accessories

Standard Kit - Included at $2,995

Every Edan X8 ships with the following items as standard:

•  Skin temperature probe

•  NIBP tubing and adult NIBP cuff (25–35 cm)

•  Adult reusable SpO₂ sensor

•  Rechargeable Li-ion battery (14.8 V)

•  3-lead ECG integrative cable with snap lead wires (AHA)

•  Snap electrodes ×30

•  Power cable and grounding cable

•  User manual and warranty documentation

Data Sheets

Edan X8 Patient Monitor Literature

Edan X8/X10/X12 Patient Monitor Spec Sheet

Edan X8 Patient Monitor Brochure