IFM ASTM Level 3 Surgical Face Mask

IFM ASTM Level 3 Surgical Face Mask

The IFM Surgical Mask Model SM3 is intended to be worn to protect both the patient and healthcare personnel from transfer of microorganisms, body fluids, and particulate material. These face masks are intended for use in infection control practices to reduce potential exposure to blood and body fluids. The face mask is single use, disposable device, provided non-sterile.

For the US market, Indiana Face Mask is now providing FDA cleared surgical masks meeting the Level 3 standard of the American Society of Testing and Materials (ASTM). The ASTM Level 3 surgical mask is for use in conditions where there is a high risk of fluid and spray of aerosol transmission, such as operating procedures.

Surgical masks by Indiana Face Mask were tested for performance in five areas: fluid resistance, differential pressure, particulate efficiency, bacterial filtration efficiency and flammability. Upon completion of testing, the surgical masks consistently met ASTM Level 3 criteria in all five performance test areas. Bacterial and particle filtration efficiency test results were greater than 98 percent.

Each box contains 25 IFM Surgical Mask Model SM3.  A case contains 250 IFM Surgical Mask Model SM3 (10 box/case).

ASTM Level 3 Surgical Mask Specifications

• Filtration Efficiency: BFE>99%, PFE>99% @ 0.1 micron

• Breathability - Delta P: < 5.0 mm H2O/cm2

• High Fluid Resistance: 160 mmHg
• Flame Spread: Class 1
• In-house meltblown technology used
• Not made with natural rubber latex
• Fully-integrated manufacturing
• 25 SM3 Surgical Masks per Box
• 250 SM3 Surgical Masks per Case (10 Box/Case)

Material Composition

• Outer Layer: Polypropylene spunbond
• Filter: Melt-blown non-woven electrostatically charged
• Inner Layer: Polypropylene spunbond
• Nose Clip: Polyethylene coated single wire
• Ear Loop: Elastic spandex